|
|
Kits
description
|
|
Part number: MLKB
|
Basic
MerMaid Kit
Mermaid
logger, communication cable, software for Palm and Windows, briefcase.
CURRENT
SENSORS AND VONNECTORS NOT INCLUDED
|
|
Part number: MLKBWT
|
Basic MerMaid Kit with water
tight casing
CURRENT SENSORS AND VONNECTORS NOT INCLUDED
|
|
Part number: MLKF
|
MerMaid
Kit
Mermaid logger, communication cable, 3 voltage clamps, live
interface, power supply, software for Palm and Windows, pre-configured Palm
handheld, briefcase.
CURRENT
SENSORS AND VONNECTORS NOT INCLUDED
|
|
Part number: MLKFWT
|
MerMaid Kit with water tight
casing
CURRENT SENSORS AND VONNECTORS NOT INCLUDED
|
|
|
Description
|
|
|
|
10mV/A. Accuracy of ± 2% from 1.5A to 150A.
Part number: MLCT150
|
150 Amps current clamps
Opening of 3 cm. 16 cm x 8 cm x 3 cm
|
|
|
5mV/A. Accuracy of ± 2% from 3A to 300A.
Part number: MLCT300
|
300 Amps current clamps
Opening of 3 cm. 16 cm x 8 cm x 3 cm
|
|
|
|
75
Amps mini current sensor
Part number: MLCT75
|
20mV/A Accuracy of ± 2% from 750mA to 75A Opening
of 1 cm. 40 mm x 26 mm x 24 mm.
|
|
|
|
15
Amps mini current sensor
Part number: MLCT15
|
100mV/A Accuracy of ± 2% from 150mA to 15A Opening
of 1 cm. 40 mm x 26 mm x 24 mm.
|
|
|
5
Amps mini current sensor
Part number: MLCT05
|
300mV/A Accuracy of ± 2% from 50mA to 5A Opening of
1 cm. 40 mm x 26 mm x 24 mm.
|
|
|
Part number: MLCTP1500
|
Current
sensors
Accuracy of
± 1% 1500A. Opening
of 50 cm.
|
|
|
Part number: MLCTF15-24
|
Flexible
Current Probes
The Flexible Current
Probes is a low cost AC current measurement probe. It is composed of a
flexible sensor and an electronic module with a 14" double insulated
cable. The flexible sensor is designed to fit around large or small
conductors and is capable of getting into tight or difficult spaces. It is
ideal for measuring AC current in a group of conductors.
Features
- 24" flexible sensor fits around conductors up to 7.6"
in diameter
- Dual measurement ranges of 150A and 1500AAC
- mV output directly proportional to the AC current measured
- Output is 10mV/A on 150A range and 1V/A on 1500A range
- Accuracy of 1% of
Reading ± 500mA
- 4% influence of conductor position in jaw
- Up to 300 hours
battery life
- Dual banana plug termination for direct input into DMMs
- EN 61010, 1000V,
Cat. III, Pollution Degree 2
- Flashing LED low battery indicator
|
|
|
Part number: MLPT600
|
Voltage
transformer and clamps
3 phase potential transformer converting 600V to 1.5V for Mermaid
voltage sensing. Fuse
protected
|
|
|
Part number: MLLi120
|
Live
Interface
Live voltage isolator transforms 12V to 120V AC or DC in dry contact
for the digital inputs of the MerMaid datalogger (isolation 2500V).
|
|
|
|
0-5V
analog input converter
Part
number: MLAi05V
|
Transforms 3 standard analog inputs into MerMaid's
electrival inputs.
Input # 1 must be reading something for inputs # 2
and # 3 to be read.
|
|
|
0-10V
analog input converter
Part
number: MLAi10V
|
|
|
0-24V
analog input converter
Part
number: MLAi24V
|
|
|
4-20mA
analog input converter
Part
number: MLAi420A
|
|
|
|
Description
|
|
Part number: MLCTA6
|
Connectors
6
connectors for banana jack of 4mm. Color code red = phase 1, black = phase
2 et blue = phase 3.
|
|
Part number: MLCTWT
|
Waterproof
connectors
6
connectors for banana jack of 4mm. Color code red = phase 1, black = phase
2 et blue = phase 3.
|
|
Part number: MLPTCWT
|
Waterproof connector for voltage
transformer
|
|
Part number: MLiCWT
|
Waterproof
digital input adaptor
6' cable
|
|
Part number: ML4CWT
|
4 caps
for unused connectors on watertight casing
|
|
Part number: MLUSB232
|
USB-RS232
cable
connects MerMaid datalogger to PC
|
|
Part number: MLCB232MF6
|
RS232
cable
6' cable extension to use with USB-RS232
cable
|
|
Part number: MLCRS232PT5
|
RS232 to
Palm T5/TX cable
connects MerMaid datalogger to Palm T5
|
