![]() |
| Key Words | Description | Duration |
| Download | Presentation and Data Download | 41 sec. |
Configure Mermaid 2009 |
7 min. |
|
| Installation Real Time | Installation procedure and Real Time | 6 min. |
| Select List Station | How to select the data to be displayed in the analysis and reports | 1:30 min. |
| Motor's Summary | Report showing the number of starts, run time, current used, suspicious events, etc. | 2:32 min. |
| Analog Chart | Report showing all analog data recorded by the Mermaid Instrument, including Current, Voltage, Analog input, Temperature and Battery status, | 2:50 min. |
| Digital Events | Report showing in a graphical format when pumps start and stop, and any other digital events. | 2:55 min. |
| Flows & Rain | The flow and rain analysis presents pump operation, inflow, outflow, pump run time, number of starts per pump and per combination, and rain data if a rain gauge was connected to the lift station. The analysis can show one line per change of state of the pumps or one line per specific period, like one line per hour, or per day or even per month. | 4:30 min. |
| Inflow & Infiltration | ||
| Evaluation Report | ||
| Export to Excel | ||
| Export to Volucalc | Export to Volucalc from Mermaid 2009 |
| Key Words | Description | Duration |
| Firmware | Upgrading the Firmware of the Instrument | 2:16 min. |
| Memory Dump | Recovering data after a major crash of the datalogger, caused by low batteries or other anomalies | 54 sec. |
| COM Port | Changing the COM port number of the USB to Serial interface. | 74 sec. |